User Tools

Site Tools


sd

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

sd [2014/02/21 20:24]
jktuning [Calibration Setup]
sd [2014/02/21 20:27] (current)
jktuning [Calibration Setup]
Line 32: Line 32:
 Setting up a calibration to be used for Speed Density operation is a little different than the normal setup for a MAF calibration. Setting up a calibration to be used for Speed Density operation is a little different than the normal setup for a MAF calibration.
  
-  - Select your load source +  - Select your load source\\ {{wiki:​sa_load.jpg}} 
-{{wiki:​sa_load.jpg}} +  - Select and Enable your MAP sensor\\ {{wiki:​sa_map.jpg}} 
-  - Select and Enable your MAP sensor +  - Select and Enable your IAT sensor\\ {{wiki:​sa_iat.jpg}} 
-{{wiki:​sa_map.jpg}} +  - **DISABLE THE MAF SENSOR**\\ {{wiki:​sa_mafdisable.jpg"​}} 
-  - Select and Enable your IAT sensor +  - Setup overboost tables (**even if naturally aspirated**)\\ {{wiki:​sa_overboost.jpg}}
-{{wiki:​sa_iat.jpg}} +
-  - **DISABLE THE MAF SENSOR** +
-{{wiki:​sa_mafdisable.jpg"​}} +
-  - Setup overboost tables (**even if naturally aspirated**) +
-{{wiki:​sa_overboost.jpg}}+
sd.txt · Last modified: 2014/02/21 20:27 by jktuning