User Tools

Site Tools


tables

Editing Tables

All of the tables in NismoTronic have the ability to use the additive change, percent change and set value change functions.

Additive Change

  • Ctrl+Up Arrow or (+) key = (+1 unit)
  • Ctrl+Down Arrow or (-) key = (-1 unit)
  • Ctrl+J → Additive Change = (+/- 1-255 units)

Percent Change

  • Ctrl+J → Percent Change
    • newTableValue = (currentTableValue * (1 + (x/100)))

Set Value Change

  • Ctrl+J → Set Value
  • Type in the value you would like to enter in the cell and hit enter to submit the change.

Primary Tables

The primary fuel and ignition tables also have a few extra functions for importing and copying maps between one another and from external TCDs.

IMPORT FROM TCD

  • Right Click → IMPORT FROM TCD → Select the TCD file you want to import the table from.
    • This will import the entire map, including RPM and Load scales into your current table.

COPY MAP FROM

  • Right Click → COPY MAP FROM → Select the table you want to copy from.
    • This will copy the entire map, including RPM and Load scales into your current table.

COPY RPM SCALES FROM

  • Right Click → COPY RPM SCALES FROM → Select the table you want to copy the RPM scale from.
    • This will only copy the RPM scale into your current table.

COPY LOAD SCALES FROM

  • Right Click → COPY LOAD SCALES FROM → Select the table you want to copy the load scale from.
    • This will only copy the Load scale into your current table.
tables.txt · Last modified: 2014/02/15 13:20 by jktuning