User Tools

Site Tools


tables

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

tables [2014/02/15 12:58]
jktuning
tables [2014/02/15 13:20] (current)
jktuning
Line 4: Line 4:
  
  
-=== Additive Change ===+==== Additive Change ​====
   *Ctrl+Up Arrow or (+) key = (+1 unit)   *Ctrl+Up Arrow or (+) key = (+1 unit)
   *Ctrl+Down Arrow or (-) key = (-1 unit)   *Ctrl+Down Arrow or (-) key = (-1 unit)
   *Ctrl+J -> Additive Change = (+/- 1-255 units)   *Ctrl+J -> Additive Change = (+/- 1-255 units)
  
-=== Percent Change ===+==== Percent Change ​====
   *Ctrl+J -> Percent Change   *Ctrl+J -> Percent Change
     *//​newTableValue = (currentTableValue * (1 + (x/100)))//     *//​newTableValue = (currentTableValue * (1 + (x/100)))//
  
-=== Set Value Change ===+==== Set Value Change ​====
   *Ctrl+J -> Set Value   *Ctrl+J -> Set Value
   *Type in the value you would like to enter in the cell and hit enter to submit the change.   *Type in the value you would like to enter in the cell and hit enter to submit the change.
Line 22: Line 22:
 The primary fuel and ignition tables also have a few extra functions for importing and copying maps between one another and from external TCDs. The primary fuel and ignition tables also have a few extra functions for importing and copying maps between one another and from external TCDs.
  
-=== IMPORT FROM TCD ===+==== IMPORT FROM TCD ====
   *Right Click -> IMPORT FROM TCD -> Select the TCD file you want to import the table from.   *Right Click -> IMPORT FROM TCD -> Select the TCD file you want to import the table from.
     * This will import the entire map, including RPM and Load scales into your current table.     * This will import the entire map, including RPM and Load scales into your current table.
  
-=== COPY MAP FROM ===+==== COPY MAP FROM ====
   *Right Click -> COPY MAP FROM -> Select the table you want to copy from.   *Right Click -> COPY MAP FROM -> Select the table you want to copy from.
     * This will copy the entire map, including RPM and Load scales into your current table.     * This will copy the entire map, including RPM and Load scales into your current table.
  
-=== COPY RPM SCALES FROM ===+==== COPY RPM SCALES FROM ====
   *Right Click -> COPY RPM SCALES FROM -> Select the table you want to copy the RPM scale from.   *Right Click -> COPY RPM SCALES FROM -> Select the table you want to copy the RPM scale from.
     * This will only copy the RPM scale into your current table.     * This will only copy the RPM scale into your current table.
  
-=== COPY LOAD SCALES FROM ===+==== COPY LOAD SCALES FROM ====
   *Right Click -> COPY LOAD SCALES FROM -> Select the table you want to copy the load scale from.   *Right Click -> COPY LOAD SCALES FROM -> Select the table you want to copy the load scale from.
     * This will only copy the Load scale into your current table.     * This will only copy the Load scale into your current table.
  
tables.txt · Last modified: 2014/02/15 13:20 by jktuning