TunerView Bluetooth Install for V1 Boards

The first thing to do is install the 4-pin header onto the NEMU board, if it has not already been installed. For best fitment you must install a header extension onto the 4-pin header so it clears the consult header plug.

Solder the 4-pin header from the bottom side of the board.

The finished product should look like this.

TunerView Bluetooth Install for V2 Boards

Simply install the NEMU2 BT module into the pre-installed 4-pin header on the top of the board.

Manufacturers
Social Networking
Facebook Instagram YouTube
Like us on Facebook
0 items